TIGER SKINS INSTALLATION TIPS and TRICKS
ALWAYS TEST ALL CHEMICALS
IN AN UNSEEN AREA OF YOUR PLASTICS FIRST!
TIGER SKINS INSTALLATION TIPS:
- DO NOT use "prep" on your plastics before installation of graphics
- DO NOT use glass cleaner to clean your plastics.
- DO clean new plastics....there is a slight residue on new parts
use rubbing alcohol or denatured alcohol to remove residue
- DO fill a CLEAN squirt bottle with water and 1-2 drops dish soap
lightly spray your plastic and the back of your TIGER SKINS before
installation...re-apply lightly as needed
- DO lay graphic over number plate lightly to line up edges and holes
as best as you can. Gently smooth into curved ares. Pick an area to
start smoothing on the graphic, on the right sides it's usually best to
start the top.
- DO use a heat gun or hair dryer to gently warm areas of your
TIGER SKINS to slightly "shrink or stretch" them as you smooth them
on your plastics
PROMO PACKS FOR RIDERS
GO SLOWLY! BUBBLES WILL GO AWAY...
WRINKLES WILL ALWAYS STAY!